Workshop Manuals Factory service & repair Land Rover
Land Rover L322 Range Rover Pre-Delivery Inspection Manual02 · C
02 · General

Pre-delivery inspection (PDI)

Make
Land Rover
Model
Range Rover L322 Range Rover Pre-Delivery Inspection Manual
Section
Pre-delivery inspection (PDI)
CPre-delivery inspection (PDI) · page 1 of 3

PRE-DELIVERY INSPECTION

Pre-delivery inspection (PDI)

$% 10.10.01

Preliminary

  1. After parking vehicle in work bay, remove keys from ignition switch.
Preliminary – After parking vehicle in work bay, remove keys from ignition switch.
  1. Check the integrity of factory fitted door and tailgate closure seals. Should a seal be broken or missing, ensure the tool kit and spare wheel are present. Also check that no internal damage to trim has occurred.
  2. Remove door and tailgate closure seals.
  3. Open bonnet for access.
Preliminary – Check the integrity of factory fitted door and tailgate closure seals. Should a seal be br
  1. Loosen nut and disconnect the transportation cut off switch cable from the battery negative terminal.

CAUTION: After switching off the ignition, wait 2 minutes before disconnecting the battery. Failure to wait two minutes will damage the navigation computer.

Preliminary – Loosen nut and disconnect the transportation cut off switch cable from the battery negativ
  1. Loosen nut and disconnect the transportation cut off switch extension lead from the battery negative earth lead.
  2. Remove and dispose of harness and switch.

Parts & tools for this job For Land Rover Range Rover

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.