LR3/Disco 3
The 4.4L V8 vent system is identical to the system used on the 4.0L V6 models. The vent system comprises:
four Roll Over Valves (ROV)
one Fuel Level Vent Valve (FLVV)
one Liquid Vapor Separator (LVS)
The vent system is mounted on the fuel tank internal carrier which is assembled outside of the tank and inserted into the
tank during the blow moulding process. None of the internal tank venting components are serviceable.
The two rear ROVs are mounted directly onto the LVS with rubber grommets and secured with clips.
The two front ROVs are located in the front of the tank and are attached to the main beam of the carrier by a moulded
clip. Both ROVs are connected to the LVS with a plastic corrugated tube.
The four ROVs vent directly into the LVS. Any liquid fuel is separated from the vapor in the LVS and drains back into the
Item Part Number
Description
1
-
Front right hand Roll Over Valve (ROV)
2
-
Carrier assembly
3
-
Fuel Level Vent Valve (FLVV) breather corrugated tube
4
-
Front ROV corrugated tube
5
-
Liquid Vapor Separator (LVS)
6
-
Rear right hand ROV
7
-
Rear left hand ROV
8
-
Fuel pump module
9
-
Rear fuel level sensor
10
-
Tank breather tube
11
-
Connector
12
-
Fuel Level Vent Valve (FLVV)
13
-
Front fuel level sensor
14
-
Front left hand ROV
15
-
Front jet pump