LR3/Disco 3
Installation
1 .
Install the fuel pump module.
Connect the fuel lines.
Secure with the strap.
Secure the fuel pressure regulator.
2 .
Install the fuel pump module access flange.
Clean the component mating faces.
Install a new seal.
Connect the 3 electrical connectors.
Connect the fuel supply line.
Connect the vent line.
3 .
CAUTION: Make sure the seal is correctly fitted.
NOTE :
Align to the position noted on removal.
Secure the fuel pump module access flange.
Install the clamp.
Tighten the screw to 4 Nm (3 lb.ft).