LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(c) Install a new injector seal to SST (holder).
SST: 09260-39015
09268-03010
NOTE: Be careful not to install the injector seal to SST (holder) at an angle. Doing so will stretch the seal and correcting this problem is very
complicated.
(d) Install SST (holder with injector seal) to the tip of the injector. Slide the seal downward into the injector groove (injector connector side) with
your fingers, as shown in the illustration.
SST: 09260-39015
09268-03020
09268-03010
HINT: Check that the seal covers the circumference of the injector groove as shown in the illustration.