Replacement
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- FRONT OIL SEAL Replacement › Replacement
EngineReplacement
Replacement
Caution
- Obtain the code number and deactivate the audio anti-theft system before disconnecting the battery. (Refer to page T–113.)
- Position the hose clamp in the original location on the hose, and squeeze the clamp lightly with large pliers to ensure a good fit.
- Disconnect the negative battery cable.
- Remove the under cover.
- Remove in the order shown in the figure, referring to Removal Note.
- Install in the reverse order of removal, referring to Installation Note.
- Timing belt
Removal / Installation.................... page B–12 - Pulley lock bolt
Removal Note.............................. page B–24
Installation Note......................... page B–25 - Timing belt pulley
Removal Note.............................. page B–25
Installation Note......................... page B–25 - Oil seal
Removal Note.............................. page B–25
Installation Note......................... page B–25
Removal note
Pulley lock bolt
- Hold the timing belt pulley with the SST.
- Connect the SST and loosen the pulley lock bolt.
- Remove the pulley lock bolt.
Parts & tools for this job For 1990 Mazda MX-5
- PARTOil filterSearch: Mazda MX-5 1990 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mazda MX-5 engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.