Crank angle sensor
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- B Engine › Crank angle sensor
EngineCrank angle sensor
Tightening torque:
49—61 N·m (5.0—6.2 m·kg, 36—45 ft·lb)
Crank angle sensor
- Apply grease to a new O-ring and the blade.
- Install the crank angle sensor and loosely tighten the installation bolt.
- Connect the crank angle sensor connector.
Steps After Installation
- Fill the radiator with the specified amount and type of engine coolant. (Refer to page E–5.)
- Connect the negative battery cable.
- Start the engine and check as follows:
- Engine coolant leakage.
- Ignition timing. (Refer to page B–8.)
- Recheck the engine coolant levels.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.