Inspection / repair
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Valve Guide (B) › Inspection / repair
EngineInspection / repair
05U0BX-126
05U0BX-127
9MU0B2-112
05U0BX-128
05U0BX-129
INSPECTION / REPAIR
- Measure the height A of each valve guide. Replace the valve guide if necessary.
Height: 16.8—17.4mm (0.661—0.685 in)
Replacement of valve guide
Note
- Although the shapes of the intake and exhaust valve guides are different, use the exhaust valve guide on both sides as a replacement.
Removal
- Remove the valve guide from the side opposite the combustion chamber with the SST.
Installation
- Assemble the SST so that depth L is as specified.
Depth L: 16.8—17.4mm (0.661—0.685 in)
- Tighten the locknut.
- Tap the valve guide in from the side opposite the combustion chamber until the SST contacts the cylinder head.
- Verify that the valve guide height is within specification.
- If not within specification, repeat Steps 1—4.
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.