Removal / inspection / installation
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Removal / inspection / installation › Removal / inspection / installation
Lubrication systemRemoval / inspection / installation
REMOVAL / INSPECTION / INSTALLATION
Caution
- Obtain the code number and deactivate the audio anti-theft system before disconnecting the battery. (Refer to page T–113.)
- Disconnect the negative battery cable.
- Drain the engine oil.
- Remove the under cover.
- Remove in the order shown in the figure, referring to Removal Note.
- Install in the reverse order of removal, referring to Installation Note.
- Oil level gauge and pipe
- Intermediate shaft
- Engine mount nut
Removal Note ............................ page D– 7 - Crossmember installation bolt and nut
Removal Note ............................ page D– 7 - Oil pan
Removal Note ............................ page D– 7
Inspect for cracks, deformation, and damage
Installation Note....................... page D– 8 - Oil strainer
- Oil pan baffle
Removal Note ............................ page D– 7
Installation Note....................... page D– 7
Parts & tools for this job For 1990 Mazda MX-5
- PARTOil filterSearch: Mazda MX-5 1990 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mazda MX-5 engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.