Spark plug
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- G Engine electrical system › Spark plug
Engine electrical systemSpark plug
- Increase the engine speed and verify that the ignition timing advances.
SPARK PLUG
Removal / Installaion
Note the following points:
- When the high-tension lead is to be pulled off, be sure to pull on the boot, not the wire.
- Apply anti-seize compound or molybdenum-based lubricant to the spark plug threads before installing.
- Tighten the spark plugs to the specified torque.
Tightening torque:
15—23 N·m (1.5—2.3 m-kg, 11—17 ft-lb)
Spark Test
- Disconnect the high-tension lead from the spark plug.
- Connect a new spark plug to the high-tension lead.
- Hold with insulated pliers approx. 5—10mm (0.20—0.39 in) from a ground.
- Crank the engine and verify that a strong blue spark is visible.
Inspection
Check the following and replace the spark plugs as necessary.
- Damaged insulation.
- Worn electrodes.
- Carbon deposits.
If cleaning is necessary, use a plug cleaner or a wire brush. Wipe upper insulator. - Damaged gasket.
Plug gap: 1.0—1.1mm (0.039—0.043 in)
Parts & tools for this job For 1990 Mazda MX-5
- PARTSpark plugsSearch: Mazda MX-5 1990 spark plugs
- TOOLSpark plug socketSearch: spark plug socket
- TOOLSpark plug gap toolSearch: spark plug gap tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.