Clutch pedal
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Adjustment › Clutch pedal
CLUTCH PEDAL
ADJUSTMENT
Clutch Pedal Height
Inspection
Measure the distance from the upper surface of the pedal pad to the carpet.
Pedal height: 175—185mm (6.89—7.28 in) (With carpet)
If necessary, adjust the pedal height.
Adjustment
- Loosen locknut Aand turn clutch switch Buntil the height is correct.
- Tighten locknut A.
Tightening torque:
14—18 Nm (1.4—1.8 m-kg, 10—13 ft-lb)
- After adjustment, inspect the pedal free play.
Clutch Pedal Free Play
Inspection
Depress the clutch pedal by hand until clutch resistance is felt.
Pedal free play: 0.6—3.1mm (0.02—0.12 in)
Total pedal free play: 5—13mm (0.20—0.51 in)
If necessary, adjust the pedal free play.
Adjustment
- Loosen locknut Cand turn push rod Duntil pedal free play is correct.
- Verify that the disengagement height as measured from the upper surface of the pedal to the carpet is correct when the pedal is fully depressed.
Minimum disengagement height: 68mm (2.68 in) (With carpet)
- Tighten locknut C.
Tightening torque:
12—17 Nm (1.2—1.7 m-kg, 8.7—12 ft-lb)
- After adjustment, inspect the pedal height.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.