Removal / inspection / installation
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Removal / inspection / installation › Removal / inspection / installation
ClutchRemoval / inspection / installation
- Remove in the order shown in the figure, referring to Removal Note.
- Inspect all parts and repair or replace as necessary.
Note
• Apply lithium based grease to the bushings and pin when installing.
- Install in the reverse order of removal, referring to Installation Note.
- Spring
Removal Note.... page H–7
Installation Note. page H–7 - Nut and lock washer
- Bolt
- Spacer
- Clutch pedal
- Bushings
- Push rod
Inspect for damage and bending - Nut
- Clip
- Wave washer
- Pin
- Spacer
- Stop
- Pedal pad
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.