Removal Note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Spring › Removal Note
ClutchRemoval Note
Removal Note
Spring
Note
- Use pads in the vise to prevent damaging the clutch master cylinder bracket.
- Place the clutch pedal assembly in the vise.
- Pry the spring off the clutch pedal as shown in the figure.
Installation Note
Spring
Note
- Use pads in the vise to prevent damaging the clutch master cylinder bracket.
- Place the clutch pedal assembly in the vise.
- Pry the spring on the clutch pedal as shown in the figure.
- Adjust the clutch pedal height and free play after installation. (Refer to page H–5.)
CLUTCH MASTER CYLINDER
PREPARATION
SST
49 0259 770BWrench, flare nut
|
For disconnecting and connecting clutch pipe |
Parts & tools for this job For 1990 Mazda MX-5
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Mazda MX-5 1990 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.