Removal Note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Removal / installation › Removal Note
ClutchRemoval Note
Caution
• Clutch fluid will damage painted surfaces. Be sure to use a container or rags to collect it. If fluid does get on a painted surface, wipe it off immediately with a rag.
- Remove in the order shown in the figure, referring to Removal Note.
- Install in the reverse order of removal, referring to Installation Note.
- Clutch pipe
- Nut
- Clutch master cylinder
- Gasket
| Removal Note.. page H– 8 | |
| Installation Note page H– 8 | |
| Check for fluid leakage from cylinder bore | |
| Overhaul ......... page H–10 | |
| Air bleeding .... page H– 9 |
Removal Note
Clutch pipe
Disconnect the clutch pipe with the SST.
Installation Note
Clutch pipe
Tighten the clutch pipe with the SST.
Tightening torque:
13—22 N·m (1.3—2.2 m·kg, 9.4—16 ft-lb)
Air Bleeding
After installation, bleed the clutch system.
(Refer to page H–9.)
Inspection and Adjustment
Clutch pedal height and free play
(Refer to page H–5.)
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.