Preparation
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Clutch release cylinder › Preparation
ClutchPreparation
PREPARATION
SST
For disconnecting and connecting clutch pipe
REMOVAL / INSTALLATION
Caution
- Clutch fluid will damage painted surfaces. Be sure to use a container or rags to collect it. If fluid does get on a painted surface, wipe it off immediately with a rag.
- Remove in the order shown in the figure, referring to Removal Note.
- Install in the reverse order of removal, referring to Installation Note.
- Clutch pipe
Removal Note....................... page H–12
Installation Note.................... page H–13
- Bolt
- Clutch release cylinder
Remove boot and check for fluid leakage
Overhaul............................. page H–13
Removal Note
Clutch pipe
Caution
- After disconnecting the clutch pipe, plug it to prevent fluid leakage.
Disconnect the clutch pipe with the SST.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.