Air bleeding
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Air bleeding › Air bleeding
Braking systemAir bleeding
AIR BLEEDING
Caution
- The fluid in the reservoir must be maintained at the 3/4 level or higher during air bleeding.
- Do not spill brake fluid onto painted surfaces.
- Jack up the vehicle and support it with safety stands.
- Remove the bleeder cap and attach a vinyl tube to the bleeder screw.
- Place the other end of the vinyl tube in a clear container and keep the tube end immersed in brake fluid during air bleeding.
- Pump the brake pedal several times.
- While the brake pedal is depressed, loosen the bleeder screw to let fluid and air escape.
- Repeat Steps 4 and 5 until there are no air bubbles in the fluid.
- Check for correct brake operation.
- Check that there is no fluid leakage. Be sure to clean away any spilled fluid with rags.
- After bleeding the air, add brake fluid to the specified level in the reservoir.
BRAKE HYDRAULIC LINE
Inspection
Check the following and replace parts as necessary.
- Cracks, damage, and corrosion of the brake hose
- Damage to the brake hose threads
- Scars, cracks, and swelling of the flexible hose
- All lines for fluid leakage
Removal / Installation
- When disconnecting the flexible hose and brake line, remove the clip after loosening the flare nut.
- When connecting the flexible hose, do not tighten it too tight or twist it.
- Check that the hose does not contact other parts when the vehicle bounces or when the steering wheel is turned all the way to the left or right.
- Bleed the air from the brake system.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mazda MX-5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.