Cater
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- R Suspension (R) › Cater
SuspensionCater
05U0RX-011
Cater
Cater is adjusted by turning the front and/or rear adjusting cam bolt at the lower arm.
Caution
- Adjust the caster before adjusting the camber.
- Loosen the front and/or rear cam nut.
- Turn the front and/or rear adjusting cam bolt to provide the correct caster angle.
Note
- Turning the front cam one graduation on the scale changes the caster angle about 22’ and the camber about 25’. Turning the rear cam one graduation changes the caster angle about 22’ and the camber about 2’.
- Adjust the camber and the toe-in.
Note
- Turning the front cam one graduation changes the camber about 25’ and the caster about 22’. Turning the rear cam one graduation changes the camber about 2’ and the caster about 22’.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Mazda MX-5 1990 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.