Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)13 · Body and cab accessories
13 · Body & interior

RH

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Security and Locks › RH
Body and cab accessoriesRH

RH

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Remove the door trim. (See DOOR TRIM REMOVAL/INSTALLATION .)
  3. Remove the screws, then remove the door lock switch.
  4. Install in the reverse order of removal.
ACCESSORIES & BODY, CAB – Security and Locks (Advanced Keyless System) – figure
Fig. 6: Identifying Power Door Lock Switch And Screw
Courtesy of MAZDA MOTORS CORP.

DOOR LOCK SWITCH INSPECTION[ADVANCED KEYLESS SYSTEM]

  1. Inspect for continuity between the door lock switch terminals.
    • If not as specified, replace the door lock switch.
ACCESSORIES & BODY, CAB – Security and Locks (Advanced Keyless System) – figure
Fig. 7: Door Lock Switch Continuity Table
Courtesy of MAZDA MOTORS CORP.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.