Workshop Manuals Factory service & repair MG
MG MGF Factory Workshop Manual (1995-2000)12 · Drive shafts
12 · Transmission

Dynamic damper - drive shaft - RH

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Repairs › Dynamic damper - drive shaft - RH
Drive shaftsDynamic damper - drive shaft - RH

DYNAMIC DAMPER - DRIVE SHAFT - RH

Service repair no - 47.10.33

Remove

  1. Remove drive shaft outer gaiter. See this section.
  2. Clean shaft with emery cloth to remove rust.
  3. Lubricate shaft with liquid soap to aid damper removal.
  4. Slide damper from shaft.

Refit

Dynamic damper - drive shaft - rh – Slide damper from shaft.
  1. Measure along shaft for fitted position of damper.
  2. Mark shaft for fitting position. Dimension ’A’ = 398.5 mm. ± 3 mm.
  3. Lubricate shaft for fitting of damper.
  4. Position damper to mark.
  5. Clean lubricant from shaft.
  6. Fit drive shaft outer gaiter. See this section.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.