Engine - lubrication
- Make
- MG
- Model
- MGF Factory Workshop Manual
- Year
- 1995–2000
- Section
- General data › Engine - lubrication
InformationEngine - lubrication
ENGINE - LUBRICATION
| System type | Wet sump, crankshaft driven eccentric rotor pump |
| Relief valve opening pressure | 4.1 bar |
| Oil pressure at idle | 1.7 to 3.5 bar |
| Maximum oil pressure at 6500 rev/min | 7.0 bar (below 40° C) |
| Oil pressure warning light switch opens | 0.3 - 0.5 bar |
| Oil filter | Full flow with renewable element cartridge |
FUEL SYSTEM
| Electronic fuel injection data | See Engine tuning data. |
| Fuel pump | |
| Type | Continuous flow, electrically driven roller vane |
| Pump maximum pressure at 13.5 V | 3.5 bar |
| Regulated injection pressure | 3.0 ± 0.2 bar |
COOLING SYSTEM
| Pressure cap opens | 1.03 bar |
| Thermostat | |
| starts to open | 86 to 90° C |
| fully open | 102° C |
| Cooling fan switch, operating temperature | ON - 102° C, OFF - 96 |
| Second cooling fan switch, operating temperature | ON - 108° C, OFF - 103 |
| Engine bay fan switch, operating temperature | ON - 75° C, OFF - |
| Engine bay ambient air, warning light switch | ON - 90° C |
° C ° C See COOLING SYSTEM, Information.
Parts & tools for this job For 1995 MG MGF
- PARTEngine gasket setSearch: MG MGF 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.