Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)03 · Information
03 · General

Tyre pressures

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
General data › Tyre pressures
InformationTyre pressures

TYRE PRESSURES

Pressures (cold):

Tyre Sizesbarlbf/in2
185/55 R15 82V (front)1.826
195/45 R16 84V (front)1.724
195/45 R16 80V (front)1.724
205/50 R15 86V (rear)1.928
215/40 ZR16 82W (front)1.724
215/40 ZR16 82W (rear)2.536
215/40 R16 86V (rear)2.536
175/65 R14 82T (spare) See Warning2.130

WARNING: The steel spare wheel supplied with cars fitted with alloy wheels is for temporary use only and must be changed as soon as possible after fitting. The car MUST be driven with caution and speed MUST NOT exceed 50 mph (80 km/h) with the spare wheel fitted. No more than one temporary spare wheel may be fitted at any one time. Replacement tyres fitted to the temporary use spare wheel must be of the same make and specification as those originally fitted.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.