WINDSHIELD AND WINDOWS - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › WINDSHIELD AND WINDOWS - Nissan 180SX S13 Workshop Manual
WINDSHIELD AND WINDOWS
WINDSHIELD AND WINDOWS
Windshield (Cont'd)
{ Apply primer &, Apply sealant evenly.
Dam rubber More than 12 (0.47) sy ] J
More than
emmy 7 (0.28) -1998 SBFO38B Unit: mm (in SB
CAUTION:
CAUTION: Allow primers to dry for 10 to 15 Windshield glass should be installed : minutes before proceeding to the next within 15 minutes of applying sealant: ; step,
sealant starts to harden 15 minutes
‘
after it is applied.
| Set glass in position and Press glass lightly and evenly. ¥
CAUTION: Check for water leakage. For sealant drying time, refer to “Drying Time for Sealant’. q Apply sealant to upper & side molding fixing portion. ’
CAUTION: Install moldings. Moiding must be installed securely so (For details, refer to “Exterior”,) that it is in position and leaves no gap.
BF-29
Parts & tools for this job For Nissan 180SX
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
As an Amazon Associate we earn from qualifying purchases.