TURBOCHARGER—CAI8ET Engine - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › TURBOCHARGER—CAI8ET Engine - Nissan 200SX S12 Workshop Manual
TURBOCHARGER—CAI8ET Engine
TURBOCHARGER—CAI8ET Engine
Inspection (Cont)
‘Condition 3: Excessively high oil consumption or exhaust shows pale blue smoke
1
Probable cause
Corrective action
| il leak at the connection of lubricating oi} passage — | —| Correct the connection.
Oil teak at oi seal of turbine —+|
Oil teak st oil se9! of compressor | Replace turbocharger assembly.
Worn journal or bearing [-—>|
Inspect turbine and compressor wheel a 2, Check operation of by-pass valve controller, follows: © Move by-pass valve to make sure that it is Visually check for cracks, clogging, deformity sticking or scratched. or other damage. © Measure rod end play of the by-pass valve: Revolve wheels to make sure that they turn troller. freely without any abnormal noise or friction. Oo not apply more than 68,7 kPa (500 mr Measure play in exial direction.
19.69 inHg) pressure to controller diaphragm. Play (axial direction): By-pass valve controller stroke/pressure: 0,013 - 0,091 mm {0,0006 - 0.0036 in)
0.38 mm (0.0150 in)/51.3 - 56.7 kPa {385 - 425 mmHg, 15.16 - 16,73 inHg) Marcury manometer rBy-pa valve controler
SEFI208
Always replace the turbocharger @s an assembly
foutty.
EF & EC-82
Parts & tools for this job For Nissan 200SX
- PARTEngine gasket setSearch: Nissan 200SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.