Overhauling the gearbox: Special tools

I : Extractor for removing and refitting the clutch release bearing guide sleeve (used in conjunction with A).

Reference 8.0316 D.

J : Mandrel for fitting the final drive oil seals.

Reference 8.0316 E.

K : Clamp for removing and refitting the fifth speed roller type synchromesh assembly (5 speed gearbox).

Reference 8.0316 F.

L : Gearbox mounting support.

Reference 8.0316 G.

SPECIAL TOOLS

M:a: Drift, ø 42 x 48 mm, length = 280 mm for fitting the output shaft bearing. Reference : 8.0316 H.

b: Drift, ø 36 x 42 mm, length = 200 mm for fitting the input shaft bearing and the clutch housing lip seal. Reference : 8.0316 J.

N Clamp for retaining the reverse shift plunger.

This part can be made from a clip of the « SERFLEX » type, width 12.