I special tools
- Make
- Peugeot
- Model
- J5 Factory Workshop Manual
- Year
- 1982–1994
- Section
- Removing - refitting (XUD9A) › I special tools
GearboxI special tools · page 1 of 3
I SPECIAL TOOLS
- (-).0316N - Engine retaining sling.
- (-).0204 - Tool for centralising the tie rod-suspension arm securing points and the gearbox rear mounting.
- (-).0316P - Thrust plate for extracting the right hand drive shaft.
Additional tools :
1 hydraulic stand.
II TIGHTENING TORQUES
| Item | N.m (lbf.ft.) |
|---|---|
| - Nut securing drive shaft to stub axle carrier : | 500 (369) |
| - Nut securing engine mounting flange (cylinder head side) : | 50 (36.9) |
| - Nut securing engine mounting flange (gearbox side) : | 50 (36.9) |
| - Nut securing flexible pad (differential side) : | 55 (40.6) |
| - Bolt securing tie rod flange and suspension arm : | 50 (36.9) |
| - Bolt securing gearbox rear mounting flange to cross member : | 50 (36.9) |
| - Suspension ball joint bolts : | 50 (36.9) |
| - Reversing light switch : | 13 (9.6) |
Parts & tools for this job For 1982 Peugeot J5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Peugeot J5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.