I

I

• Remove the gearbox.

II

• The gearbox is refitted by carrying out the removing operations in reverse.
• Grease the following with MOLYKOTE BR 2 PLUS paste :
• splines on the input shaft
• the release bearing guide sleeve
• the clutch shaft thrust arms.

PRECAUTION : Centralise the flanges on the :

• gearbox rear mounting
• tie rods and left hand suspension arm

using tool : 8.0204 →

III

• If the gearbox has been drained, fill it with oil of the specified grade.

Capacity : 1.25 litres.

It is easier to fill the box through the reversing light switch tapping.

Check the level with the dipstick.