Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Air Spring: Removal and Replacement
Removing and Installing Rear Spring Strut (Air Springs)
WM 432519 Removing and installing rear spring strut (air springs)
Preliminary work
Caution:
Increased risk of accidents due to raising the wheel carrier incorrectly.
-
Injury and material damage possible.
-
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels). When raising the suspension, use a suitable
intermediate layer (hard rubber).
-
Do not damage the brake cover plate.
The relevant wheel must be removed when carrying out repairs to avoid damaging the drive shaft.
1. Remove wheel.
Removing rear spring strut
Air-spring strut at rear
1. To bleed the levelling system (compressed air must be released from the system), use the Porsche System Tester. To do this, select the Bleed