Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-777002.png)
levelling system menu item in the Levelling system.
2. Fit protective tube on drive shaft (shop-made to protect the drive shaft).
3. Loosen pressure line on residual pressure retaining valve -arrow- using insert part T10212 (front spring strut connection in figure). Then, unclip
the pressure line from the holders and set it aside.
4. Remove stone guard for CDC sensor -arrow-.
5. Disconnect CDC sensor plug connection -arrow-, remove the cable from the holder, and set the cable aside.
