Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. For vehicles with PDCC (Porsche Dynamic Chassis Control), remove the protection cap from the valve block.
7. Remove the fastening screw for the connecting link/spring strut on the wheel carrier. To do this, use a suitable lift with rubber base in order to
prevent slipping. Lay the connecting link aside.
8. Remove the four fastening screws (top) -arrows-.
Information
For vehicles with PDCC, raise the wheel suspension slightly using a transmission jack (do not raise wheel suspension higher than normal vehicle
position (vehicle resting on wheels). This changes the angular position of the control arm and the spring strut can be removed by turning carefully.
9. Carefully remove spring strut downwards -arrow-.