Vertical dimensions (page 2 of 2)
- Make
- Rover
- Model
- 200 Body Repair Manual
- Year
- 1995–1999
- Section
- Body dimensions
InformationVertical dimensions · page 2 of 2
| Location | Dimension | Reference |
|---|---|---|
| Headlamp mounting jig hole to datum line Front sidemember jig hole to datum line Front suspension reinforcement to datum line Sidemember to sill jig hole to datum line Rear longitudinal front jig hole to datum line Rear longitudinal rear jig hole to datum line Rear body jig hole to datum line Rear damper mount to datum line | 330mm ± 1.5mm 139.4mm ± 1.5mm 677.6mm ± 1.5mm 50.8mm ± 0mm 121mm ± 1.5mm 259mm ± 0mm 346mm ± 1.5mm 536mm ± 1.5mm | 1 2 3 4 5 6 7 8 |
All dimensions taken at centre line of set screw, set screw hole or jig hole.
Parts & tools for this job For 1995 Rover 200
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Rover touch up paint
- PARTPanel clip assortmentSearch: Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.