Workshop Manuals Factory service & repair Rover
01 Introduction02 Fuse details03 Earth points and header joints04 Description and operation05 Connectors
Rover 200 Electrical Library (1996-1999)04 · Description and operation
04 · General

Fog Lamps (page 2 of 2)

Make
Rover
Model
200 Electrical Library
Year
1996–1999
Section
Exterior lamps operation
Description and operationFog Lamps · page 2 of 2

position 1, battery voltage from link 4 in the engine compartment fuse box on the N/S wire passes via the lighting switch to the contacts of the daylight running relay on the R wire. An R/G wire from the relay contacts feeds fuses 8 and 12 in the passenger compartment fuse box. From fuse 8, power is fed on R/B wires to LH sidelamps and LH rear lamps. From fuse 12, power is fed on R/O wires to RH sidelamps, RH rear lamps and both number plate illumination lamps. Earth returns for all lamps are on B wires.

When the starter switch is turned to position I, regardless of the lighting switch position, fuse 29 in the satellite fuse box supplies battery voltage on the G wire to one side of both daylight running relay coils. In this situation both coils will energise, battery voltage on the N/S wire from link 4 in the engine compartment fuse box feeds f uses 8 and 12 in the passenger compartment fuse box on the R/G wire. From fuse 8, power is fed on R/B wires to LH sidelamps and LH rear lamps. From fuse 12, power is fed on R/O wires to RH sidelamps, RH rear lamps and both number plate illumination lamps. Earth returns for all lamps are on B wires.

Parts & tools for this job For 1996 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.