Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)09 · Emission control
09 · Engine

Catalytic converter - ’K8’

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Catalytic converter - ’K8’
Emission controlCatalytic converter - ’K8’

CATALYTIC CONVERTER - ’K8’

Service repair no - 17.50.01

Remove

  1. Raise front of vehicle.

WARNING: Support on safety stands.

Catalytic converter - ’k8’ – Raise front of vehicle.
  1. Remove 2 nuts securing catalytic converter to front pipe.
Catalytic converter - ’k8’ – Remove 2 nuts securing catalytic converter to front pipe.
  1. Remove 2 nuts securing catalytic converter to intermediate pipe.
  2. Disconnect catalytic converter from intermediate pipe. Remove catalytic converter from front pipe.
  3. Remove and discard gaskets.

CAUTION: Catalytic converters are manufactured from ceramic material which is very fragile, avoid heavy impacts on converter casing.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.