Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)03 · Information
03 · General

Final drive

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
General data › Final drive
InformationFinal drive

FINAL DRIVE

Ratios:

1.1 ’K’ series4.200 : 1
1.4 ’K’ series3.937 : 1
1.6 ’K’ series3.765 : 1
1.8 ’K’ series3.938 : 1
1.8 ’K’ series with VVC
- Except BRM4.200 : 1
- BRM3.938:1
2.0 ’L’ series3.938 : 1

Road speed at 1000 rev/min in top gear:

1.1 ’K’ series29.3 km/h
1.4 ’K’ series31.8 km/h
1.6 ’K’ series:
Manual gearbox33.3 km/h
Automatic gearbox41.7 km/h
1.8 ’K’ series35.5 km/h
1.8 ’K’ series with VVC
- Except BRM33.3 km/h
- BRM32.3 km/h
2.0 ’L’ series41.8 km/h

18.2 mph 19.8 mph

20.7 mph 25.9 mph 22.1 mph

20.7 mph 20.1 mph 26.0 mph

STEERING - EXCEPT BRM

NOTE: The following steering geometry settings are given in degrees and minutes, decimal parts of a degree and millimetres. Steering and Suspension geometry settings are for a vehicle at unladen weight.

Front wheel alignment - toe-out - per side:0° 5’ ± 0° 7.5’
  5J x 14 wheel10.53 mm ± 0.80 mm
  5 /2 J x 15 wheel0.60 mm ± 0.84 mm
Front wheel camber - negative:0° 20’ ± 0°
  5J x 14 wheel12.10 mm ± 1.03 mm
  5 /2 J x 15 wheel2.20 mm ± 1.10 mm
Front wheel caster:2° ± 0° 30’
  5J x 14 wheel112.41 mm ± 3.10 mm
  5 /2 J x 15 wheel13.30 mm ± 3.31 mm
King pin inclination:12° 7’ ± 0°
  5J x 14 wheel176.34 mm ± 3.10 mm
  5 /2 J wheel81.80 mm ± 3.31 mm
Turns - lock to lock:
  Manual4.0
  PAS3.4
Rear wheel alignment - toe-in - per side:0° 8’ ± 0° 10’
  5J x 14 wheel10.82 mm ± 1.03 mm
  5 /2 J x 15 wheel0.88 mm ± 1.10 mm
Rear wheel camber - negative:0° 20’ ± 0°
  5J x 14 wheel12.10 mm ± 1.03 mm
  5 /2 J wheel2.20 mm ± 1.10 mm

0.10° ± 0.12°

10’ 0.33° ± 0.21°

2 ° ± 0.5°

30’ 12.12° ± 0.5°

0.13° ± 0.21°

10’ 0.33° ± 0.21 °

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.