Rear
- Make
- Rover
- Model
- 200 Workshop Manual
- Year
- 1995–1999
- Section
- General data › Rear
InformationRear
Rear
| Type | Independent, torsion beam ’H’ frame with dampers, coil springs and anti-roll bar - if fitted. |
| Nominal height to wheel arch from hub centre *. | |
| All models except 1.8 ’K’ series & 1.8 ’K’ series | |
| with VVC | 387 mm ± 10 mm |
| 1.8 ’K’ series and 1.8 ’K’ series with VVC | 367 mm ± 10 mm |
| Road spring identification (colour code): | |
| All models except 1.8 ’K’ series and 1.8 ’K’ | |
| series with VVC | WHITE |
| 1.8 ’K’ series and 1.8 ’K’ series with VVC | ORANGE |
| Anti-roll bar: | |
| 1.8 ’K’ series and 1.8 ’K’ series with VVC - All | |
| models | 18 mm diameter |
| 2.0 ’L’ series | 16 mm diameter |
* At unladen weight
SUSPENSION - BRM
Front
| Type | Independent, MacPherson strut damper with coil spring and anti-roll bar. |
| Nominal height to wheel arch from hub centre *: | 346 mm ± 10 mm |
| Road spring identification (colour code): | WHITE |
| Anti-roll bar: | 25 mm diameter |
Rear
| Type | Independent, torsion beam ’H’ frame with dampers, coil springs and anti-roll bar. |
| Nominal height to wheel arch from hub centre * | 347 mm ± 10 mm |
| Road spring identification (colour code): | WHITE |
| Anti-roll bar: | 18 mm diameter |
* At unladen weight
Parts & tools for this job For 1995 Rover 200
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Rover 200
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.