Steering - brm
- Make
- Rover
- Model
- 200 Workshop Manual
- Year
- 1995–1999
- Section
- General data › Steering - brm
InformationSteering - brm
STEERING - BRM
NOTE: The following steering geometry settings are given in degrees and minutes, decimal parts of a degree and millimetres. Steering and Suspension geometry settings are for a vehicle at unladen weight.
| Front wheel alignment - toe-out - per side: | 0° 5’ ± 0° 7.5’ |
| Front wheel camber - negative: | 0° 51’ ± 0° |
| Front wheel caster: | 1° 37’ ± 1° |
| King pin inclination: | 10° 48’ ± 1 |
| Turns - lock to lock: | 3.2 |
| Rear wheel alignment - toe-in - per side: | 0° 8’ ± 0° 7.5’ |
| Rear wheel camber - negative: | 0° 20’ ± 0° |
0.10° ± 0.12° 0.61 mm ± 0.85 mm 45’ 0.85° ± 0.75° 6.11 mm ± 5.32 mm 1.61° ± 1° 11.50 mm ± 7.11 mm ° 10.8° ± 1° 77.54 mm ± 7.11 mm
0.13° ± 0.12° 0.93 mm ± 0.85 mm 45’ 0.33° ± 0.75 ° 2.41 mm ± 5.32 mm
SUSPENSION - EXCEPT BRM
Front
| Type | Independent, MacPherson strut damper with coil spring and anti-roll bar. |
| Nominal height to wheel arch from hub centre *: | |
| All models except 1.8 ’K’ series & 1.8 ’K’ series | |
| with VVC | 386 mm ± 10 mm |
| 1.8 ’K’ series & 1.8 ’K’ series with VVC | 366 mm ± 10 mm |
| Road spring identification (colour code): | |
| 1.1, 1.4 & 1.6 ’K’ series: | |
| Manual gearbox | PINK |
| Air conditioning and/or Automatic | GREY |
| 1.8 ’K’ series and 1.8 ’K’ series with VVC | BLUE |
| 2.0 ’L’ series | BROWN |
| Anti-roll bar: | |
| 1.1, 1.4 & 1.6 ’K’ series: | 19 mm diameter |
| 1.8 ’K’ series and 1.8 ’K’ series with VVC | 25 mm diameter |
| 2.0 ’L’ series | 23 mm diameter |
Parts & tools for this job For 1995 Rover 200
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Rover power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.