Reverse Lamps
- Make
- Rover
- Model
- 600 Electrical Library
- Section
- Exterior lamps operation › Reverse Lamps
Description and operationReverse Lamps
Reverse Lamps
Automatic Gearbox
When the ignition is switched on, voltage is applied to the automatic inhibitor switch via a Y wire from fuse 8 of the passenger compartment fuse box. When reverse gear has been selected, voltage is applied to the reverse lamps and trailer connector via G/B wires. The earth paths for the lamps is on B wires.
Manual Gearbox
When the ignition is switched on, voltage is applied to the reverse switch via a Y wire from fuse 2 for RHD vehicles and from fuse 8 for LHD vehicles. When reverse gear has been selected, voltage is applied to the reverse lamps and trailer connector via G/B wires. The earth paths for the lamps is on B wires.
Parts & tools for this job For Rover 600
- PARTReplacement bulbsSearch: Rover 600 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.