Steering fluid leaking
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Fault finding › Steering fluid leaking
SteeringSteering fluid leaking
Steering fluid leaking
| POSSIBLE CAUSE | POSSIBLE FAULT | ACTION |
|---|---|---|
| Steering reservoir filler | Reservoir overfilled | Disconnect hose and drain to correct level. |
| Air leak in suction side | Replace or repair reservoir, inlet hose or pump front seal | |
| Low pressure hoses | Damage or deterioration or incorrect assembly | Replace or repair components. |
| Pipes | Leaking at gearbox connection | Tighten connector If still leaking replace pipe or valve body unit |
| High pressure hoses or pipes | Leak from threaded fitting | Tighten fitting. If still leaking, replace hose or pipe. If still leaking, replace component screwed into. |
| Leak from swaged joint | Replace hose. | |
| Speed sensor | Leaking | Replace sensor. |
Parts & tools for this job For Rover 600
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Rover power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.