Workshop Manuals Factory service & repair Rover
Rover 200/400 Coupé, Cabriolet & Tourer Workshop Manual03 · Maintenance
03 · Maintenance

Check and top-up power steering fluid

Make
Rover
Model
Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual
Section
Maintenance › Check and top-up power steering fluid
MaintenanceCheck and top-up power steering fluid · page 1 of 2

Check and top-up power steering fluid

Carry out fluid level check when engine is stopped and system is cold.

Note: It is essential that power steering system should not have been operated since engine was stopped.

1·4

Diagram of a rectangular power steering reservoir showing the filler cap (3) and MAX/MIN level indicators (2).

1·6/2·0

Diagram of a cylindrical power steering reservoir showing the filler cap (3), UPPER and LOWER level indicators (2), and reference code 8RM 0588A.
  1. Clean reservoir around filler cap and level indicators.
  2. Visually check fluid level is between level indicators.
  3. If required, remove filler cap and top-up with DEXRON II D specification fluid. Do not overfill.

CAUTION: Ensure no dirt is allowed to enter reservoir when cap is removed.

  1. Refit filler cap.

Parts & tools for this job For Rover Coupé, Cabriolet & Tourer

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.