Workshop Manuals Factory service & repair Saab
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Saab 9-7X V8-6.0L (2008)15 · Cruise Control
15 · Electrical

Cruise Control: Diagrams (page 91 of 100)

Make
Saab
Model
9-7X
Engine
V8-6.0L
Year
2008
Section
Diagrams
Cruise ControlDiagnostic Aids · page 91 of 100
background image

SIR/SRS Wiring Repairs

SIR/SRS Wiring Repairs

Tools Required

J-38125 Terminal Repair Kit

The Supplemental Inflatable Restraint (SIR) System/Supplemental Restraint System (SRS) requires special wiring repair procedures due to the sensitive
nature of the circuitry. Follow the specific procedures and instructions when working with the SIR/SRS, and the wiring components, such as connectors
and terminals.

Important: Do not use the terminals in the kit in order to replace damaged SIR/SRS system terminals. Use either an SIR/SRS pigtail or a
terminated lead from the SIR Repair Kit Tray.

The tool kitJ-38125 contains the following items:

*

DuraSeal splice sleeves, in order to repair the SIR/SRS wiring

*

A special crimping tool

*

A heat torch

*

An instruction manual

The DuraSeal splice sleeves have the following 2 critical features:

*

A special heat shrink sleeve environmentally seals the splice. The heat shrink sleeve contains a sealing adhesive inside.

*

A cross hatched (knurled) core crimp provides the necessary low resistance contact integrity for these sensitive, low energy circuits. 

TheJ-38125 also serves as a generic terminal repair kit. The kit contains the following items:

*

A large sampling of common electrical terminals

*

The correct tools in order to attach the terminals to the wires

*

The correct tools in order to remove the terminals from the connectors

SIR/SRS Connector Repair (Plastic Body and Terminal Metal Pin) 

The terminals in the SIR/SRS system are made with a special plating. This plating provides the necessary contact integrity for the sensitive, low energy
circuits. Use theJ-38125 SIR/SRS Terminal Repair Kit for repairing SIR/SRS terminals and connectors. Do not substitute any other terminals for those in
the repair kit.

TheJ-38125 SIR/SRS Terminal Repair Kit contains:

*

Various terminated leads for sensing and diagnostic module (SDM) terminal replacement

*

Various connector positive assurance (CPA) locks for SIR/SRS connectors

*

Base of steering column pigtail connectors part number 12085514

*

Yellow vinyl electrical tape

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2008 Saab 9-7X 6.0L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.