seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch release assembly, clutch slave cylinder: repairs > < Clutch: Removing and installing|Installation

Leon Mk1

Clutch pedal switchF36: Removing and installing
Clutch pedal switch -F36-: Removing and installing
  Note
So that it is correctly fitted in the clutch pedal bracket, the clutch pedal switch -F36- should only be fitted once.
t  Removing → Anchor
t  Installing → Anchor
Removing
–  Remove footwell cover on driver side → body - inner assembly work; Rep. Gr.68.
–  Unplug the connector from the clutch pedal switch -F36-.
   
–  Rotate the clutch pedal switch -F36--1- 45° to the left and pull it out of the position.
  Note
The clutch pedal remains in rest position, that is, not pressed.
Installing
l  The pedal assembly must be located in the rest position.
–  Lubricate the end of the rod with molybdene paste, according to → Spare parts catalogue.
–  Insert the clutch pedal switch -F36- through the installation hole, pressing it against the pedal assembly and securing it by rotating 45° to the right.
–  Plug in the connector of the clutch pedal switch -F36-.
–  Install footwell cover on driver side → body - inner assembly work; Rep. Gr.68.
  E30-10036

Clutch release assembly, clutch slave cylinder: repairs > < Clutch: Removing and installing|Installation