–
| Connect the clutch pedal to the master cylinder operation rod. The allotment -A- must be on the operating rod -B- of the clutch master cylinder. |
–
| Press the clutch pedal-in the direction- of the arrow in its recording. Ensure that the actuation rod is seated correctly in clutch pedal. |
–
| Sometimes, in order to fit the allotment it is necessary to remove the securing nut from the clutch pedal and gently move the fastening screw on the pedal bracket to give the clutch pedal greater axial clearance. |
–
| Insert clutch pedal switch into mount and turn 90º to right. |
|
|
|