Dismantling and assembling 5th?gear

Make

SEAT

Model

Leon Mk1

Section

0AF 5-speed manual gearbox › Gearbox,mechanics,gears,shafts,internal operation › Dismantling and assembling 5th?gear

Power transmissionDismantling and assembling 5th?gear

Removal: –  Raise the vehicle and remove the left front wheel.

–  Remove bolts -1- and - 2- and remove central soundproofing panel.

–  Remove left soundproofing -Anchorage points 1 ... 3-. –  Place below the collecting tray -T20173-. –  Remove the drain plug with the wrench -U 40090- and empty the gearbox oil.   Caution When removing the gearbox casing, some remaining gear oil may drip.

–  Remove the bolts -arrows- and remove the gearbox casing cover.

–  Take out the bushing pin -arrow- and remove the fork of 5th gear -1-. –  Using the pliers -A-81124-, remove the circlip -2- for the 5th gear synchroniser body. –  Using the pliers -A-81124-, remove the circlip -3- for the 5th gear mobile pinion. –  Remove 5th gear synchro-ring

–  Remove the hub and the synchronous ring of the 5th gear. For this purpose, fit the bridge with bolt - U 40100/1- at that location on the synchronous ring where the greatest contact surface to the hub is.

01 Transmission