SEAT Workshop Service and Repair Manuals > Leon Mk1 > 6-speed manual gearbox 02Q, front-wheel drive | Gearbox,mechanics,gears,shafts,internal operation

Changes in the area of the ball bearing

Gearboxes manufactured from week 15/06 up to approx. week 04/08:

One washer on top and one underneath the mount of the ball bearing → Item.

On the bearing housing:

Bearing housing		Washer on the bearing housing
Gearboxes that have been manufactured from week 14/06	Dimension „A“ = 10 mm	no
Gearboxes manufactured from week 15/06 up to approx. week 04/08	Dimension „A“ = 10.7 mm	Yes
For gearboxes that have been manufactured from approx. week 14/08	Under the bearing housing: Flattened area for the grooved ball bearing	no

On the bearing housing -arrow-:

Isa little lower with gearboxes manufactured from week 15/06 up to approx. week 04/08

This mount has been designed a little lower -arrow- for taking on the washer under the ball bearing → Item.

Under the bearing housing		Washer under the bearing housing
Gearboxes that have been manufactured up to week 14/06	No change.	no
Gearboxes manufactured from week 15/06 up to approx. week 04/08	Has a deeper design.	Yes
For gearboxes that have been manufactured from approx. week 14/08	Flattened area -B- for the ball bearing -A-	no

For gearboxes that have been manufactured from approx. week 04/08, flattened area of the ball bearing -A- and its mount -B- in the gearbox casing

l	When flattened locations are present, washers must not be mounted on the top nor on the bottom of the ball bearing .

SEAT Workshop Service and Repair Manuals