seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing gearbox oil cooler > < Oil and oil filter

Leon Mk1

Transporting and securing gearbox to assembly stand
   
Transporting and securing gearbox to assembly stand
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
t  base -T20172/1 -, see equivalent → Anchor
t  Tower -T20172/2 -, see equivalent → Anchor
t  Gearbox support -T20172/4A -, see equivalent → Anchor
t  counterhold -T20186 -, see equivalent → Anchor

Operation process
–  Fit the base -T20172/1- with the tower -T20172/2- and the gearbox support -T20172/4A -.
   
–  Fit counterhold -T20186 - on gearbox in order to transport it.
  WARNING
When transporting, take care not to damage the transmission oil radiator.
  E34-10062
–  Fit the gearbox to the gearbox support -T20172/4A - as shown in the figure.
  Note
If the full gearbox revolves on the installation stand with the oil sump facing upwards, the breather pipes of the gearbox casing should be closed.
  E37-10007

Removing and installing gearbox oil cooler > < Oil and oil filter