Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk101 · Power transmission
01 · Transmission

Gear drive mechanism: repairing

Make
SEAT
Model
Leon Mk1
Section
Manual gearbox 020 5-speed › Clutch, control › Gear drive mechanism: repairing
Power transmissionGear drive mechanism: repairing
Installation
–  Fit the neutral overpass spring into tool -T20117-. To do this, compress the spring in a vice with protected jaws.
–  Press the clutch to the floor.
   
–  First fit the neutral overpass spring in the housing at the front of the support block -arrow A- and align the rear seat of the spring with the clutch pedal pivot -arrow B-.
–  Release the clutch pedal gradually until tool -T20117- can be removed.
  E30-0083
Fit the protective cover (upper and lower parts) to the pedal assembly bracket, in the reverse order to disassembly → Anchor
–  Secure electric cables to their original positions.
–  Fit main junction box to its bracket. Check that the relay and cable connectors are correctly fitted.
–  Fit the footwell area cover: → General body repairs-assembly work, interior; Rep. Gr.70.
–  Fit the shelf on driver's side: → General body repairs-assembly work, interior; Rep. Gr.68.
–  Fit the clutch cable on the gearbox → Chapter
–  Check clutch cable adjustment → Chapter
–  Connect the battery strap.
  E30-0065

The same page in: Leon Mk2.

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.