seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing crankshaft > < Removing

Leon Mk1

Installing
Installing
–  Lightly oil sealing lip of oil seal.
   
–  Fit guide sleeve from oil seal fitting tool -U-40062- onto crankshaft journal.
–  Slide oil seal over guide sleeve.
  E13-0047
–  Press in oil seal using press sleeve from oil seal fitting tool -U-40062- onto stop with old securing bolt from crankshaft toothed belt sprocket.
–  Install crankshaft toothed belt sprocket. To do this hold toothed belt sprocket with counter-hold -T20018- and secure using a new securing bolt 90 Nm + 1/4 turn (90 °).
  Note!
The turning further angle can be measured with protractor -T20030-.
–  Install and tension toothed belt → Chapter.
–  Install ribbed belt → Chapter.
  E13-0048

Removing and installing crankshaft > < Removing