seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Transport and fix the gearbox to installation stand > < Gearbox support: removing and installing

Leon Mk1

Pendulum support: removing and installing
Pendulum support: removing and installing
Pendulum support: removing
–  Raise the vehicle.
   
–  Remove the central soundproofing, bolts -1 ... 3-.
  A10-1565
–  Unscrew bolts -1... 3 - and remove the pendulum support.
Pendulum support: fitting
Installation is carried out in reverse order, noting the following:
Assemble the pendulum support
–  Bolt pendulum support to gearbox first, then to subframe.
  A10-1578
–  Replace bolts.
  N34-1826
Component Nm
Pendulum support tosubframe -A-
Replace bolts		100 + 90° (1/4 turn)
 gearbox arrows -B- and -C-
Replace bolts		40 + 90° (1/4 turn)

   

Transport and fix the gearbox to installation stand > < Gearbox support: removing and installing