seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Coding the parking aid control unit > < Removing and installing rear parking aid senders

Leon Mk1

Removing and installing parking aid control unit
Removing and installing parking aid control unit
The parking aid control unit -J446- is located under the left side panel trim in the luggage compartment.
Removing:
–  Switch off ignition and all electrical consumers, and remove ignition key.
–  Remove left-hand side panel trim in luggage compartment → General body repairs, interior; Rep. gr.70.
   
–  Release and pull off connector -2-.
–  Undo the two nuts -arrows- and remove parking aid control unit -J446--1-.
Installing:
Install in the same way but in reverse order of removal. When doing this, note the following:
–  Tighten the two nuts to torque specified in assembly overview → Chapter.
  N94-12628

Coding the parking aid control unit > < Removing and installing rear parking aid senders