Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk201 · Power transmission
01 · Transmission

6-speed manual gearbox 01X (Support): Technical data

Make
SEAT
Model
Leon Mk2
Section
General repair instructions › Components: › Support
Power transmissionSupport
Support
t  Install new tapered roller bearings as supplied; do not lubricate additionally with oil.
t  Lubricate all bearings (except tapered roller bearings) with gear oil before installing in gearbox.
t  Heat inner races of tapered roller bearings to approx. 100°C before installing. Press in onto stop when installing so there is no axial clearance.
t  Do not interchange outer or inner races of bearings of the same size. The bearings are matched in pairs. The bearings come in matched pairs.
t  If required, renew the tapered roller bearings on one shaft together and use new bearings from a single manufacturer.
t  Install needle bearings with lettered side (thicker metal) towards fitting tool.
t  Grease needle bearing for gearbox input shaft in rear of flywheel.
   

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.