Assembly overview
- Make
- SEAT
- Model
- Leon Mk2
- Section
- Starter-current supply-CC › Disconnecting and reconnecting battery › Assembly overview
Vehicle electricsAssembly overview
| Assembly overview |
| 1 - | Earth wire battery terminal clamp |
| q | Observe notes for battery terminal clamp bolt → Chapter. |
| q | Vehicles with a start/stop system have battery monitoring control unit -J367- (battery sensor) installed in addition. Observe notes → Anchor. |
| 2 - | Securing nut for earth wire battery terminal clamp |
| q | M6 |
| q | 6 Nm |
| 3 - | Positive wire battery terminal clamp |
| q | Observe notes for battery terminal clamp bolt → Chapter. |
| 4 - | Securing nut for positive wire battery terminal clamp |
| q | M6 |
| q | 6 Nm |
| 5 - | Battery |
| q | Disconnecting → Chapter |
| q | Connecting → Chapter |
| 6 - | Clamping plate |
| q | Observe assembly notes |
| 7 - | Clamping plate securing nut |
| q | M8x35 |
| q | 20 Nm |
Parts & tools for this job For SEAT Leon
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.