Workshop Manuals Factory service & repair Skoda
01 Running gear02 Engine03 Body04 Drive unit05 Power transmission06 Vehicle electrics07 Heating, ventilation, air conditioning system08 Power unit
Skoda Fabia Mk201 · Running gear
01 · Steering & suspension

Removing and installing steering column

Make
Skoda
Model
Fabia Mk2
Section
Chassis › Steering › Removing and installing steering column
Running gearRemoving and installing steering column
Removing and installing steering column
Special tools and workshop equipment required
t  Vehicle diagnosis, measurement and information system -VAS-
t  Adhesive tape (commercially available)
Removing and installing steering column – Skoda Fabia Mk2  Note
t  New steering columns supplied as spare parts are secured for transport. This transport security must be removed once the steering column has been installed.
t  Steering columns are supplied as a spare part with ignition lock housing but without lock cylinder and ignition starter switch. The lock cylinder and ignition starter switch must be removed from the removed steering column or be obtained and installed as a spare part.
t  Do not carry out repair work on the steering column.
t  Always replace the self-locking nuts and screws.
t  Replace the affected screws and nuts.
t  Pay attention to the measures after re-connecting the battery → Electrical System; Rep. gr.27.
   

Parts & tools for this job For Skoda Fabia

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.